Precision Blade Dicing Saw Wafer Ceramic Glass Cutting
Product Description
DS830 precision dicing machine uses the DS-300 software control system, imported high-resolution lens and camera to enhance graphics alignment accuracy and efficiency. DS830 is applicable to the cutting process of silicon, PCB, ceramic, glass, lithium niobate, alumina and quartz.
Features
• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
About US:
Features
- Graphical and simulative display of cutting process
- Water and gas curtain employed to reduce cutting powder residue
- Multi-angle water spray
- Broken Blade Detector (BBD) option
| Specifications | ||
| Configuration and performance | Workpiece size | Φ200mm | 180mm (for square) |
| Groove depth | ≤4mm or customize | |
| Table flatness | ±0.005mm/150mm | |
| Alignment system | 80x straight light + ring light (40x 210x optional) | |
| Spindle | Revolution speed range | 10000~50000 rpm |
| Output power | 1.5kW(2.2kW optional) | |
| X axis | Drive mode | Servo motor |
| Max. stroke | 380mm | |
| Stroke resolution | 0.001mm | |
| Feed speed range | 0.1~400mm/s | |
| Y axis | Drive mode | Step motor + grating closed-loop control system |
| Max. stroke | 210mm | |
| Stroke resolution | 0.0005mm | |
| Single-step positioning accuracy | ≤0.003mm/5mm | |
| Index positioning accuracy | ≤0.005mm/210mm | |
| Z axis | Drive mode | Step motor |
| Max. stroke | 30mm | |
| Stroke resolution | 0.001mm | |
| Repeatability accuracy | 0.002mm | |
| Θ axis | Drive mode | DD motor |
| Max. rotating angle | 380° | |
| Angle resolution | 0.0002° | |
| Basic specification | Power supply | Single phase, AC220V±10% |
| Power consumption | 0.9kW (processing) | |
| 0.8kW (warming up) | ||
| Compressed air | Pressure: 0.55~0.8Mpa; average flow rate: 350L/min | |
| Cleaning water | Pressure: 0.2~0.4Mpa; flow rate 3.0L/min | |
| Cooling water | Pressure: 0.2~0.4Mpa; flow rate 1.5L/min | |
| Exhaust air rate | 1.8m3/min (ANR) | |
| Overall dimensions W×D×H | 775mm×960mm×1650 mm | |
| Weight | 600kg | |
| Environmental Conditions |
• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
About US:
Product Categories : Precision Dicing Saw
Other Products
Hot Products
GPRS wireless pressure measuring instruments HPT800-WRS485 Smart Digital Water Tank Radar Level GaugeHPT300-S3 4 20mA 0 5V ambient pressure transmitter with angular connector good quality and priceOil level tanke level gauge Holykell Wholesale products oil tank fuel level gaugeHPT604 4-20mA 24vdc 316 stainless steel diesel fuel oil tank level gauge sensorHolykell HPT604 stainless steel RS485 PTFE cable gasoline level sensorSubmersible 12VDC RS485 4-20mA 0-5V water level sensorTemperature Humidity Control Display ChannelsHPT300-C air compressor pressure sensor for HVAC systemsceramic pressure sensor for brake system, air compressor and oil compressorHPT601 Holykell Level Measuring Instruments for Drinking Water and Milk and TankHigh Temperature Boiler Water Pressure Sensor Transducer HPT200-HT HolykellCaterpillar Water Temperature Sensor Gas Water Heater Temperature Sensor 23518092UE3005 0-5M ultrasonic sensors measuring level of liquidsUE3005 0-2M high quality ultrasonic fuel level sensor 4-20maRS485 Flowmeter Modbus Diesel Flow Meter