Precision Dicing Saw for Wafer Cutting 6 Inch Ds616
Product Description
DS616 precision dicing machine uses DS-200 software control system with touch screen control so that the image alignment of workpiece is simple and convenient. The machine is equipped with high-power spindle and DD motor with higher accuracy that further enhance the dicing performance. DS616 is applicable to the cutting process of silicon, gallium arsenide, ceramic, glass, lithium niobate, alumina, quartz, sapphire, crystal and PCB in the application fields including diode, triode, MEMS, IC, LED, NTC, photovoltaic, medical device and scintillation crystal.
Features
• Use clean, oil-free air (dew point below -15ºC, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature (fluctuations within ±1ºC).
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, blower, heat generation equipment or oil mist generating parts.
• Please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on Pressure Sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
Features
- Constantly monitor spindle air pressure, hydraulic pressure and current to reduce spindle damage
- Cutting scope available on request
- Available for 160mm × 160mm square plate
- Optional image automatic recognition function
- Optional NCS function (non-contact height measurement)
- Reasonable structure, easy maintenance, reducing fault
- High degree of automation
| |||
Configuration and performance | Workpiece size | Φ6" | ≤160mm x 160mm | |
Groove depth | ≤4mm | ||
Table flatness | ±0.005mm/150mm | ||
Alignment system | 70x straight light + ring light(210x optional) | ||
Spindle | Revolution speed range | 3000~40000 rpm | |
Output power | 1.5kW | ||
X axis | Drive mode | Servo motor | |
Max. stroke | 240mm | ||
Stroke resolution | 0.001mm | ||
Feed speed range | 0.1~400mm/s | ||
Y axis | Drive mode | Step motor + grating closed-loop control system | |
Max. stroke | 170mm | ||
Stroke resolution | 0.0005mm | ||
Single-step positioning accuracy | ≤0.003mm/5mm | ||
Index positioning accuracy | ≤0.005mm/170mm | ||
Z axis | Drive mode | Step motor | |
Max. stroke | 30mm | ||
Scale resolution | 0.001mm | ||
Repeatability accuracy | 0.002mm | ||
Θ axis | Drive mode | DD motor | |
Max. rotating angle | 380° | ||
Angle resolution | 0.0002° | ||
Basic specification | Power supply | Single phase, AC220V±10% | |
Power consumption | 0.8kW (processing) | ||
0.7kW (warming up) | |||
Compressed air | Pressure: 0.55~0.8Mpa; average flow rate: 350L/min | ||
Cleaning water | Pressure: 0.2~0.4Mpa; flow rate: 3.0L/min | ||
Cooling water | Pressure: 0.2~0.4Mpa; flow rate: 1.5L/min | ||
Exhaust air rate | 2m3/min (ANR) | ||
Overall dimensions W×D×H | 665mm×850mm×1650 mm | ||
Weight | 500kg |
Environmental Conditions |
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature (fluctuations within ±1ºC).
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, blower, heat generation equipment or oil mist generating parts.
• Please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on Pressure Sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
Product Categories : Precision Dicing Saw
Other Products
Hot Products
GPRS wireless pressure measuring instruments HPT800-WRS485 Smart Digital Water Tank Radar Level GaugeHPT300-S3 4 20mA 0 5V ambient pressure transmitter with angular connector good quality and priceOil level tanke level gauge Holykell Wholesale products oil tank fuel level gaugeHPT604 4-20mA 24vdc 316 stainless steel diesel fuel oil tank level gauge sensorHolykell HPT604 stainless steel RS485 PTFE cable gasoline level sensorSubmersible 12VDC RS485 4-20mA 0-5V water level sensorTemperature Humidity Control Display ChannelsHPT300-C air compressor pressure sensor for HVAC systemsceramic pressure sensor for brake system, air compressor and oil compressorHPT601 Holykell Level Measuring Instruments for Drinking Water and Milk and TankHigh Temperature Boiler Water Pressure Sensor Transducer HPT200-HT HolykellCaterpillar Water Temperature Sensor Gas Water Heater Temperature Sensor 23518092UE3005 0-5M ultrasonic sensors measuring level of liquidsUE3005 0-2M high quality ultrasonic fuel level sensor 4-20maRS485 Flowmeter Modbus Diesel Flow Meter