Precision Dicing Saw for 8" Workpiece Cutting (DS9100)
Product Description
DS9100 Precision Dicing Saw can be widely used for a variety of processing requirements. The 1.8KW spindle and high rigidity door structure are employed on dicing equipment, so it reduces the impact of spindle vibration on the cutting effect and improves the stability and quality of process. DS9100 is applicable to the cutting process of silicon, PCB, ceramic, glass, lithium niobate, alumina and quartz.
Features
• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
About US:
Certifications:
Features
- Available for workpiece with the dimension of 250 x 250mm
- High rigidity door structure
- With automatic image recognition function
- With NCS (non-contact height measurement) function
- Optional BBD (Broken Blade Detector) function
- Optional tool detection function
- Optional online sharpening function
Specifications | ||
Configuration and performance | Workpiece size | φ8 | ≤250mm x 250mm |
Groove depth | ≤4mm or customize | |
Table flatness | ±0.005mm/200mm | |
Alignment system | 28x straight light + ring light 280x straight light + ring light(70x 140x optional) | |
Spindle | Revolution speed range | 6000~60000 rpm |
Output power | 1.8kW | |
X axis | Max. stroke | 260mm |
Stroke resolution | 0.001mm | |
Feed speed range | 0.1~600mm/s | |
Y axis | Max. stroke | 260mm |
Stroke resolution | 0.0001mm | |
Single-step positioning accuracy | ≤0.002mm/5mm | |
Index positioning accuracy | ≤0.005mm/260mm | |
Z axis | Max. stroke | 40mm |
Stroke resolution | 0.001mm | |
Repeatability accuracy | 0.002mm | |
Θ axis | Drive mode | DD motor |
Max. rotating angle | 380° | |
Angle resolution | 0.0002° | |
Basic specification | Power supply | Three phases, AC380V±10% |
Compressed air | Pressure: 0.5~0.7Mpa; average flow rate 350L/min | |
Cleaning water | Pressure: 0.2~0.4Mpa; flow rate 4.0L/min | |
Cooling water | Pressure: 0.2~0.4Mpa; flow rate 1.5L/min (0.3MPa/hour) | |
Exhaust air rate | 5 m3/min (ANR) | |
Overall dimensions W×D×H | 900mm×1050mm×1800 mm | |
Weight | 1200kg |
Environmental Conditions |
• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
About US:
Certifications:
Product Categories : Precision Dicing Saw
Other Products
Hot Products
GPRS wireless pressure measuring instruments HPT800-WRS485 Smart Digital Water Tank Radar Level GaugeHPT300-S3 4 20mA 0 5V ambient pressure transmitter with angular connector good quality and priceOil level tanke level gauge Holykell Wholesale products oil tank fuel level gaugeHPT604 4-20mA 24vdc 316 stainless steel diesel fuel oil tank level gauge sensorHolykell HPT604 stainless steel RS485 PTFE cable gasoline level sensorSubmersible 12VDC RS485 4-20mA 0-5V water level sensorTemperature Humidity Control Display ChannelsHPT300-C air compressor pressure sensor for HVAC systemsceramic pressure sensor for brake system, air compressor and oil compressorHPT601 Holykell Level Measuring Instruments for Drinking Water and Milk and TankHigh Temperature Boiler Water Pressure Sensor Transducer HPT200-HT HolykellCaterpillar Water Temperature Sensor Gas Water Heater Temperature Sensor 23518092UE3005 0-5M ultrasonic sensors measuring level of liquidsUE3005 0-2M high quality ultrasonic fuel level sensor 4-20maRS485 Flowmeter Modbus Diesel Flow Meter