Smart Submersible Level Transmitter Oil Level Sensor
Product Description
Smart level transmitter
PCM260 has passed long-term aging and stability screening with stable and reliable performance and can be used in harsh outdoor environment. Meanwhile, it can display liquid level on site. Zero shift and full scale span shift available.
Features
Piezoresistive diffused silicon pressure sensor
Probe insertion measurement method, easy to install
For Level Measurement
Multiple protective structure design, high protection ability
LCD option
Variety of styles, suitable for various industrial applications
Anti-corrosion stainless steel material adopted, suitable for many occasions
Applications
Static pressure level
Liquid tanks
Sewage
Industrial water
Pools
Wells
Rivers
Seawater
Lakes
1. Installation in still water (deep wells, pools, liquid tanks, etc.)
Installation tips:
1) When measuring the level of stationary fluid in an open container, place the level transmitter vertically into the bottom of the container and secure the cable connecting the transmitter to the junction box at the opening of the container.
2) When the medium viscosity is relatively large (such as sewage pool), casing or bracket can be installed to ensure that the transmitter can be put into the bottom of the container.
3) When doing an open-air installation, the terminal box of the transmitter should be placed in a ventilated and dry place to avoid direct exposure to light and rain, which may cause the shell temperature to be too high or water to get inside and damage the internal circuit board.
2. Installation in moving water (rivers, lakes, etc.)
Installation tips:
1) When measuring the water level in flowing water, when the medium fluctuates greatly, a steel pipe can be inserted in the water channel with an inner diameter of about 50 cm. Make several holes of about Φ5 in diameter on the side of the immersed pipe opposite to the flow direction to allow water to enter the pipe and fix the cable and junction box at the outlet of the pipe.
2) When the medium of the water channel fluctuates greatly or the sediment is large, a damping device can be installed to filter the sediment, eliminate the adverse effects of dynamic pressure and wave and ensure the measurement accuracy.
3) When installing the product in lightening intensified area, please indicate "Lightning Protection" when placing an order. Meanwhile, it is recommended that users install lightning protection devices at the site and ensure that the product and power supply are reliably grounded to reduce damage to the transmitter caused by lightning.
Example: PCM260-1.5miB1J3L1.5
Refer to product model PCM260, with pressure range 1.5m H2O, output signal 4~20mA (24VDC supply), electrical connection cable outlet, cable length 1.5m.
Optional accessories
1. The part of cable exceeding the standard cable length
2. PCM260 anti-blocking protective cover (with filter)
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
Probe insertion measurement mode, small size, simple and convenient installation
HART protocol option
RS485-MODBUS protocol option
Multi protection structure design, high protection ability
Corrosion resistant stainless steel adopted, applicable to various industry fields
Support configuration applications
PCM266 level transmitter is a fully sealed submerged type liquid level measuring instrument in full stainless steel design. The product adopts high stability and reliability piezoresistive OEM Pressure Sensor and high precision smart transmitter processing circuit, and applies precision digital temperature compensation technique and non-linearity correction technique. The waterproof cable is hermetically connected to the shell, and the breather pipe is set inside the cable, which can be used in liquid for a long time. The integrated structure and standardized output signal provide convenience for field use and automatic control. The product works in two wire system. It is compact, light-weighted, easy to install and use. It can directly replace the analog output transmitter of 4 ~ 20mA of two wire system. It is applicable to equipment matching and the measurement and control of static pressure level and liquid level in liquid tanks, sewages, industrial water, ponds, wells, rivers, sea, lakes, etc.
PCM266 level transmitter is a fully sealed submerged type liquid level measuring instrument in full stainless steel design. The product adopts high stability and reliability piezoresistive OEM Pressure Sensor and high precision smart transmitter processing circuit, and applies precision digital temperature compensation technique and non-linearity correction technique. The waterproof cable is hermetically connected to the shell, and the breather pipe is set inside the cable, which can be used in liquid for a long time. The integrated structure and standardized output signal provide convenience for field use and automatic control. The product works in two wire system. It is compact, light-weighted, easy to install and use. It can directly replace the analog output transmitter of 4 ~ 20mA of two wire system. It is applicable to equipment matching and the measurement and control of static pressure level and liquid level in liquid tanks, sewages, industrial water, ponds, wells, rivers, sea, lakes, etc.
Pressure range | |
Pressure range | 0.5m, 1m, 2m, 5m, 10m, 20m H2O |
Output signal | |
Output | 4 to 20mA + Hart protocol | 4 to 20mA + RS485-MODBUS protocol |
Specification | |
Accuracy (linearity, repeatability and hysteresis) | ±0.5%F.S. (Typical) |
Overpressure | 150%F.S. |
Supply | 24VDC |
Compensated temp. | 0ºC - 60ºC (0m - 10m H2O) | -10ºC - 70ºC (10m - 20m H2O) |
Operating temp. | -20ºC - 85ºC |
Medium temp. | 0ºC - 100ºC |
Storage temp. | -40ºC - 125ºC |
Zero temp. coefficient | ±1%F.S. (0ºC - 85ºC) |
Span temp. coefficient | ±1%F.S. (0ºC - 85ºC) |
Long term stability | ≤0.2%F.S.S./year |
Housing material | Stainless steel 316L |
Sensor material | Stainless steel 316L |
Protection | IP68 |
Housing diameter | φ26.5mm |
Weight | 250g(approx) |
Mechanical Drawing |
How to order |
PCM260 has passed long-term aging and stability screening with stable and reliable performance and can be used in harsh outdoor environment. Meanwhile, it can display liquid level on site. Zero shift and full scale span shift available.
Features
Piezoresistive diffused silicon pressure sensor
Probe insertion measurement method, easy to install
For Level Measurement
Multiple protective structure design, high protection ability
LCD option
Variety of styles, suitable for various industrial applications
Anti-corrosion stainless steel material adopted, suitable for many occasions
Applications
Static pressure level
Liquid tanks
Sewage
Industrial water
Pools
Wells
Rivers
Seawater
Lakes
Performance parameters | |
Pressure range | 0~0.5m…20m…200m H2O |
Supply & output | 4~20mA (18~36V, 24V typical) |
4~20mA with display (12~36V, 24V typical) | |
1~5V, 0~5V, 0.5~4.5V, 0~10V (12~32V, 24V typical) | |
Operating temp. | -20ºC~85ºC |
Medium temp. | -10ºC~70ºC |
Storage temp. | -40ºC~125ºC |
Compensated temp. | 0m~10m H2O: 0ºC~60ºC |
10m~200m H2O: -10ºC~70ºC | |
Zero temp. coefficient | ±1.5%FS (within compensated temp.) |
Span temp. coefficient | ±1.5%FS (within compensated temp.) |
Overpressure | 200%FS~300%FS |
Mechanical vibration | 20g (20~5000HZ) |
Shock | 100g (11ms) |
Accuracy | 0.5%FS |
Insulation | 100MΩ/250VDC |
Response time | ≤1ms (Up to 90%FS) |
Long term stability | ±0.2%FS/year |
Protection | IP68 |
Material | Low copper aluminum alloy for junction box; stainless steel for level probe |
Polyurethane wire for cable | |
Medium compatibility | All kinds of media compatible with stainless steel 304 |
Electrical connection |
Wiring method |
Installation instructions (for reference only) |
1. Installation in still water (deep wells, pools, liquid tanks, etc.)
Installation tips:
1) When measuring the level of stationary fluid in an open container, place the level transmitter vertically into the bottom of the container and secure the cable connecting the transmitter to the junction box at the opening of the container.
2) When the medium viscosity is relatively large (such as sewage pool), casing or bracket can be installed to ensure that the transmitter can be put into the bottom of the container.
3) When doing an open-air installation, the terminal box of the transmitter should be placed in a ventilated and dry place to avoid direct exposure to light and rain, which may cause the shell temperature to be too high or water to get inside and damage the internal circuit board.
2. Installation in moving water (rivers, lakes, etc.)
Installation tips:
1) When measuring the water level in flowing water, when the medium fluctuates greatly, a steel pipe can be inserted in the water channel with an inner diameter of about 50 cm. Make several holes of about Φ5 in diameter on the side of the immersed pipe opposite to the flow direction to allow water to enter the pipe and fix the cable and junction box at the outlet of the pipe.
2) When the medium of the water channel fluctuates greatly or the sediment is large, a damping device can be installed to filter the sediment, eliminate the adverse effects of dynamic pressure and wave and ensure the measurement accuracy.
3) When installing the product in lightening intensified area, please indicate "Lightning Protection" when placing an order. Meanwhile, it is recommended that users install lightning protection devices at the site and ensure that the product and power supply are reliably grounded to reduce damage to the transmitter caused by lightning.
Pressure range selection | |||||
Pressure range code | Pressure reference | Pressure range | Overpressure | Burst pressure | Remark |
0.5mi | G | 0.5m H2O | 300%FS | 600%FS | |
1mi | G | 1m H2O | 300%FS | 600%FS | |
1.5mi | G | 1.5m H2O | 300%FS | 600%FS | |
2mi | G | 2m H2O | 300%FS | 600%FS | |
2.5mi | G | 2.5m H2O | 300%FS | 600%FS | |
3mi | G | 3m H2O | 300%FS | 600%FS | |
3.5mi | G | 3.5m H2O | 300%FS | 600%FS | |
4mi | G | 4m H2O | 300%FS | 600%FS | |
4.5mi | G | 4.5m H2O | 300%FS | 600%FS | |
5mi | G | 5m H2O | 300%FS | 600%FS | |
5.5mi | G | 5.5m H2O | 300%FS | 600%FS | |
6mi | G | 6m H2O | 300%FS | 600%FS | |
6.5mi | G | 6.5m H2O | 300%FS | 600%FS | |
7mi | G | 7m H2O | 300%FS | 600%FS | |
8mi | G | 8m H2O | 300%FS | 600%FS | |
9mi | G | 9m H2O | 300%FS | 600%FS | |
10mi | G | 10m H2O | 200%FS | 500%FS | |
12mi | G | 12m H2O | 200%FS | 500%FS | |
15mi | G | 15m H2O | 200%FS | 500%FS | |
18mi | G | 18m H2O | 200%FS | 500%FS | |
20mi | G | 20m H2O | 200%FS | 500%FS |
Cable length selection | |||
Pressure range code | Mapping relation | Code | Definition |
0.5mi | L1.5 L2 L3 L5 L6 L8 L10 L12 L15 L18 L20 L25 | L1.5 | Cable length 1.5m |
1mi | L1.5 L2 L3 L5 L6 L8 L10 L12 L15 L18 L20 L25 | L2 | Cable length 2m |
1.5mi | L2 L3 L5 L6 L8 L10 L12 L15 L18 L20 L25 | L3 | Cable length 3m |
2mi | L3 L5 L6 L8 L10 L12 L15 L18 L20 L25 | L5 | Cable length 5m |
2.5mi | L3 L5 L6 L8 L10 L12 L15 L18 L20 L25 | L6 | Cable length 6m |
3mi | L5 L6 L8 L10 L12 L15 L18 L20 L25 | L8 | Cable length 8m |
3.5mi | L5 L6 L8 L10 L12 L15 L18 L20 L25 | L10 | Cable length 10m |
4mi | L5 L6 L8 L10 L12 L15 L18 L20 L25 | L12 | Cable length 12m |
4.5mi | L5 L6 L8 L10 L12 L15 L18 L20 L25 | L15 | Cable length 15m |
5mi | L5 L6 L8 L10 L12 L15 L18 L20 L25 | L18 | Cable length 18m |
5.5mi | L6 L8 L10 L12 L15 L18 L20 L25 | L20 | Cable length 20m |
6mi | L8 L10 L12 L15 L18 L20 L25 | L25 | Cable length 25m |
6.5mi | L8 L10 L12 L15 L18 L20 L25 | For exceeding length, order as accessory. | |
7mi | L8 L10 L12 L15 L18 L20 L25 | ||
8mi | L10 L12 L15 L18 L20 L25 | ||
9mi | L10 L12 L15 L18 L20 L25 | ||
10mi | L10 L12 L15 L18 L20 L25 | ||
12mi | L15 L18 L20 L25 | ||
15mi | L15 L18 L20 L25 | ||
18mi | L20 L25 | ||
20mi | L25 |
How to order |
Example: PCM260-1.5miB1J3L1.5
Refer to product model PCM260, with pressure range 1.5m H2O, output signal 4~20mA (24VDC supply), electrical connection cable outlet, cable length 1.5m.
Optional accessories
1. The part of cable exceeding the standard cable length
2. PCM260 anti-blocking protective cover (with filter)
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
Product Categories : Level Measurement > Level Sensor &transmitter
Premium Related Products
Other Products
Hot Products
GPRS wireless pressure measuring instruments HPT800-WRS485 Smart Digital Water Tank Radar Level GaugeHPT300-S3 4 20mA 0 5V ambient pressure transmitter with angular connector good quality and priceOil level tanke level gauge Holykell Wholesale products oil tank fuel level gaugeHPT604 4-20mA 24vdc 316 stainless steel diesel fuel oil tank level gauge sensorHolykell HPT604 stainless steel RS485 PTFE cable gasoline level sensorSubmersible 12VDC RS485 4-20mA 0-5V water level sensorTemperature Humidity Control Display ChannelsHPT300-C air compressor pressure sensor for HVAC systemsceramic pressure sensor for brake system, air compressor and oil compressorHPT601 Holykell Level Measuring Instruments for Drinking Water and Milk and TankHigh Temperature Boiler Water Pressure Sensor Transducer HPT200-HT HolykellCaterpillar Water Temperature Sensor Gas Water Heater Temperature Sensor 23518092UE3005 0-5M ultrasonic sensors measuring level of liquidsUE3005 0-2M high quality ultrasonic fuel level sensor 4-20maRS485 Flowmeter Modbus Diesel Flow Meter